Thermal flywheel effects on the time varying conduction heat transfer through structural walls

dc.contributor.author	Τσιλιγγίρης, Παναγιώτης Θ.	el
dc.date.accessioned	2015-06-07T21:43:17Z
dc.date.available	2015-06-07T21:43:17Z
dc.date.issued	2015-06-08
dc.identifier.uri	http://hdl.handle.net/11400/15568
dc.rights	Αναφορά Δημιουργού-Μη Εμπορική Χρήση-Όχι Παράγωγα Έργα 3.0 Ηνωμένες Πολιτείες	*
dc.rights.uri	http://creativecommons.org/licenses/by-nc-nd/3.0/us/	*
dc.source	http://www.sciencedirect.com/science/article/pii/S0378778803000537#	en
dc.subject	Wall heat transfer
dc.subject	Thermal flywheel effect
dc.subject	Μεταφορά θερμικού τοίχους
dc.subject	Φαινόμενο θερμικού αέρα
dc.title	Thermal flywheel effects on the time varying conduction heat transfer through structural walls	en
heal.type	journalArticle
heal.classification	Technology
heal.classification	Energy
heal.classification	Τεχνολογία
heal.classification	Ενέργεια
heal.classificationURI	http://zbw.eu/stw/descriptor/10470-6
heal.classificationURI	http://zbw.eu/stw/descriptor/14175-2
heal.classificationURI	N/A-Τεχνολογία
heal.classificationURI	N/A-Ενέργεια
heal.identifier.secondary	doi:10.1016/S0378-7788(03)00053-7
heal.language	en
heal.access	campus
heal.recordProvider	Τ.Ε.Ι Αθήνας. Σχολή Τεχνολογικών Εφαρμογών. Τμήμα Μηχανικών Ενεργειακής Τεχνολογίας Τ.Ε.	el
heal.publicationDate	2003-10
heal.bibliographicCitation	Tsilingiris, P. (November 2003). Thermal flywheel effects on the time varying conduction heat transfer through structural walls. Energy and Buildings. 35(10). pp. 1037-1047. Elsevier B.V: 2003. Available from: http://www.sciencedirect.com/science/article/pii/S0378778803000537# [Accessed 01/07/2003]	en
heal.abstract	Wall time varying conduction heat transfer investigations are very important for the prediction of heating and cooling loads in air conditioning practice and absolutely essential to the passive solar heating design. The walls store heat, absorb and dissipate a fraction of it and transmit the rest into the conditioned space at a later time, which depends on the wall thermal inertia. The present work aims at the description of a developed numerical model, which is validated successfully against analytical results from the literature and allows the prediction of transient and quasi-steady-state thermal behaviour of two basic structural wall design groups of a growing thermal inertia. The model allows the calculation of the time varying conduction heat flux for a wide range of progressively heavier wall designs, under the effect of time varying meteorological conditions, something which allows their design evaluation for a specific application. A drastic reduction of the daily fluctuation of the quasi-steady-state heat flux would be possible by using a broad range of heavier walls, something which can be quantified by the introduction of a dimensionless quantity defined as wall damping-out efficiency. This is attributed to the thermal inertia of a specific wall design, which is also responsible for phasing-out of the maximum heat flux. Both phenomena, which are comparatively investigated for the two groups of specified walls, are desirable particularly for the development of peak load control strategies.	en
heal.publisher	Elsevier B.V.	en
heal.journalName	Energy and Buildings	en
heal.journalType	peer-reviewed
heal.fullTextAvailability	true